Archive

Archive for September, 2017

Introducing PiSerialixed

September 23rd, 2017

To use a Raspberry Pi 3, you need an HDMI TV, and HDMI Cable and at least a keyboard. The board then boots up showing console messages right on the Television. This method works, however, it needs a TV and a keyboard, which may not be convenient all the times.

This is where PiSerilaxed comes into picture. It is a tiny little board that slips in the USB Port of your laptop on one end and on the 5 Pins of the 40 Pin Connector on the Raspberry Pi 3 board. When you power on the Raspberry Pi board, it shows console messages on the Serial Port of your laptop.

Here are the steps needed to use your Pi Serialixed

1. Download the latest version of the Raspbian stretch lite and burn your SD Card.
2. On the SD card there is a file called config.sys - open this file and add the following line in the end

enable_uart=1

3. Insert this SD card into Raspberry Pi 3.

4. Now insert the Pi Serialixed in the Raspberry Pi 3 with 5 Pins of PiSerialixed aligning exactly with the outermost 5 corner pins
of Raspberry Pi 3.

5. Now insert the Pi Serialixed in your Laptop and check computer -> Properties -> Device Manager. Check the COM Port Number of the Serial Port.

It should show up something similar to this

 

 

6. Download Putty if you do not have and open the Serial Port with the settings as follows

7. Now power on the Raspberry Pi 3 and you should see the console message.

Enjoy your PiSerialixed.

Uncategorized

HubPiWi - USB Hub with Integrated Wifi for Raspberry Pi Zero

September 9th, 2017

THE HUBPiWi IS NO LONGER IN OUR INVENTORY

With the release of The Pi Zero W we find it impractical to stock up on more HUBPiWi. We are sorry for the inconvience, however we still have HubPiWi Blue In stock which you can buy here:

Get HubPiWi Blue

We are sorry for the inconvenience, and thank you for understanding.

Best Regards!!!

Vikas Shukla

Uncategorized

Get HubPiWi Blue

September 9th, 2017

The HubPiWi Blue is in stock and up for sale!

Order The HubPiWi Blue: ( Shipping in US is $4 for first and $1 for each additional)

HubPiWi Blue - USB Hub +Wifi+BT for Pi Zero
Hub + Wifi+BT for Raspberry Pi Zero, Shipping is $4 in US
$5.00

Order your HubPiWi Blue today!:

Introducing The HubPiWI Blue.

The Pi Zero is a tiny $5 computer. It is very powerful; but without WiFi, Bluetooth, and any USB Ports it is not very useful.

The HubPiWI Blue is an add-on board for the Pi Zero containing Bluetooth, WiFi, and 3 USB ports. The best part is that there is no soldiering required. Just screw in 4 screws and your ready to roll.

The HubPiWI Blue is more cost effective and saves you from the hassle of buying components from different places.

That means you'll save $6.50! Impressive!

A less complicated setup...

No more wires getting in the way! And your 3 USB Ports are still vacant!

Uncategorized